FREE QUOTE CALL OR TEXT
0424 408 330
We Will Beat All Quotes By Up To 10%*
No Call Out Fee Conditions apply*
GET YOUR JOB BOOKED IN AND FINISHED TODAY !!
"*" indicates required fields
Concrete Grinding Sydney
At Microcement Services NSW, our professional team can complete a wide range of projects including: surface preparation works, wall glue removal, water proofing membrane removal, floor grinding, concrete polishing, epoxy paint removal, floor preparation, floor levelling and more.
How Much Does Concrete Grinding Cost?
The price for Concrete Grinding generally varies between $10 and $90 per square meter, based on the scope of work and the desired surface finish.
Basic grinding services are usually charged between $10 and $60 per square meter. Whereas eliminating an existing surface coating may range from $10 to $90 per square meter.
Here’s a more detailed breakdown of factors that can affect the cost
TYPE OF GRINDING:
General grinding for a standard finish is less expensive than grinding to remove a coating.
SIZE OF THE AREA:
Smaller areas may be proportionally more expensive due to setup time and the need for more detail work.
FLOOR CONDITION:
The current condition of the concrete or coating will also affect the price.
TYPE OF FINISH:
Custom finishes such as exposed aggregate, honed concrete and polished concrete can increase costs.
ACCESSABILITY:
Difficult-to-reach areas may require specialised equipment and more time, impacting the cost.
How Long Is The Concrete Grinding Process?
Concrete Grinding is typically carried out at a rate of 10 to 80 square metres per hour. However, the exact duration can vary based on several factors, including the size of the area, the condition of the concrete, and the type of material being removed.
Small bathroom: 1–2 hours
Single room: 2–4 hours
Full house: 1–2 days
Large commercial & industrial jobs: by schedule/quote
What Services Do We Offer?
Here at Flooring And Grinding we specialise in a large range of concrete grinding services, such as:
– Glue Removal
– Paint Removal
– Bump Removal
– Trip Hazard Removal
– Concrete Grinding (3MM MAX)
– Line Marking Removal
– Epoxy Coating Removal
– Spraycrete Removal
– Stencil Concrete Removal
– Stamped Concrete Removal
– Waterproofing Membrane Removal
– Rooftop Waterproofing Membrane Removal
What Is Concrete Grinding Used For?
Concrete Grinding is commonly used to level off a slab, remove paints, glues, epoxies, stains, and other coatings from concrete in order to prepare for new floor coverings, coatings, or to polish concrete surfaces to perfection. Concrete grinding provides good adhesion for new flooring systems, coatings or toppings.
Lets dig a bit deeper into what Concrete Grinding does:
IMPROVES SURFACES SMOOTHNESS AND LEVELNESS:
Concrete grinding removes surface irregularities caused by construction imperfections, slab warping, or faulting. It can level minor highs in concrete slabs (up to 3mm) and prepare surfaces for levelling compounds. This creates a smoother and more uniform surface for new flooring or other treatments.
REMOVES COATINGS AND IMPERFECTIONS:
Concrete grinders can remove various coatings like glues, paints, sealants, epoxy, stencil concrete and waterproofing membranes. It can also remove stains, scratches, and other imperfections, restoring the concrete to a more original state.
PREPARES SURFACE FOR NEW FLOORING:
By creating a smooth, clean, and porous surface, concrete grinding ensures that new flooring, such as tiles, vinyl, or timber, can properly bond to the concrete. This is crucial for the durability and longevity of the new flooring.
ENHANCES APPEARANCE:
A well-grinded concrete surface can have a polished and glossy appearance, especially when followed by a grinding and sealing process. This can be a cost-effective way to improve the look of an old concrete floor without the need for a new flooring installation.
REDUCES RISK OF INJURY:
By removing rough, uneven areas and trip hazards, concrete grinding can reduce the risk of tripping or injury on a concrete floor.
What Are The Benefits Of Concrete Grinding?
Concrete Grinding is a powerful method for eliminating surface flaws in concrete, creating a clean, even finish. Concrete grinding is a practical and efficient way to enhance, restore, and prepare concrete surfaces. Whether for residential, commercial, or industrial spaces, this process offers a wide range of benefits:
ENHANCED SAFETY:
Smoothing out concrete surfaces through grinding increases hardness and traction, helping to minimize the risk of slips, trips, and other accidents.
IMPROVED AESTHETICS:
Polished concrete floors gain a cleaner and more attractive look, which is especially desirable in residential settings.
INCREASED LONGEVITY:
By removing irregularities and defects, concrete grinding reinforces the strength of the surface, contributing to longer-lasting results.
COST SAVINGS:
Grinding down an existing concrete slab is often more economical than tearing it out and replacing it with new concrete.
BETTER SURFACE TEXTURE:
For applications such as roads and driveways, a more refined texture improves usability and wear resistance.
IMPROVED GRIP:
In areas that frequently get wet—like kitchens, bathrooms, or entrances—grinding enhances traction and reduces the likelihood of slipping.
SURFACE RESTORATION:
Concrete grinding can remove up to 3mm of surface imperfections, revitalizing worn or damaged concrete and restoring it to a usable, like-new condition.
REMOVAL OF SURFACE RESIDUE:
This process effectively eliminates old coatings such as paint, glue, sealants, epoxy, waterproof membranes, and grime, leaving behind a clean and uniform surface.
PREPARES SURFACE FOR NEW FLOORING:
A properly ground surface ensures successful installation of various flooring types including tiles, timber, carpet, vinyl, and linoleum. Proper preparation is essential for maximizing floor life and performance.
IDEAL FOR COMMERCIAL AND INDUSTRIAL SPACES:
Concrete grinding is an excellent solution for high-traffic areas like warehouses, retail spaces, and offices, delivering durable, smooth, and easy-to-maintain flooring that withstands heavy use over time.
Is Your Concrete Grinding Service Really Dust-Free?
Absolutely. We use HEPA-rated vacuum systems that can capture up to 99.99%* of fine concrete dust. We go further than many in the industry.
Why Do I Need Concrete Grinding?
Concrete grinding is often necessary for a variety of practical, aesthetic, and safety reasons. Here’s why you might need concrete grinding:
1. Surface Smoothing And Levelling
Uneven Surfaces: Over time, concrete can settle unevenly or be poured with slight inconsistencies. Grinding helps create a smooth, level surface.
Trip Hazards: In walkways or driveways, even small height differences between slabs can become tripping hazards. Grinding evens these out.
2. Surface Preparation
Before Coatings or Finishes: Grinding prepares the concrete for the application of coatings (like epoxy), paint, tile, or carpet by creating a rough texture for better adhesion.
Removal of Contaminants: Old adhesives, paint, sealers, or grime can be removed through grinding to ensure a clean surface.
3. Polishing For Aesthetics
Polished Concrete Floors: Grinding is the first step in creating polished concrete floors, which are durable, low-maintenance, and attractive.
Exposed Aggregate Look: Grinding can also expose the aggregate in the concrete for a decorative finish.
4. Repair And Maintenance
Crack and Damage Repair: Grinding can help in resurfacing areas that have minor cracks or wear.
Improving Drainage: Smoothing slopes can help redirect water flow and improve drainage in garages or outdoor spaces.
5. Removing Imperfections
High Spots or Bumps: Sometimes new concrete sets with imperfections. Grinding removes these to achieve a uniform appearance.
Surface Stains: Light grinding can help remove superficial stains or discoloured spots.
What Is Concrete Grinding?
Concrete Grinding involves an abrasive tool, like the Walk Behind Concrete Grinder or a Hand Held Concrete Grinder in combination with rotating diamond discs to slowly shave off small portions of concrete and level, smooth, or clean the surface of a concrete slab.
Concrete Grinding is also used to remove all types of coatings, such as glue, spraycrete, paints, sealers, waterproof membranes, epoxy, stencil concrete etc, once concrete grinding has been completed you can finally successfully install a new Flooring System, Floor Coating or Floor Levelling product, The slab will also be ready to be Honed or Polished. Or simply have a clean, level, and smooth concrete floor.
Will Concrete Grinding Damage My Concrete?
Not at all. We grind only the surface layer. There’s no impact on the slab’s strength or structural integrity.
Is A Skip Bin Required?
No, we do not make our clients hire a skip bin, we take all rubbish to a local resource management centre for disposal.
Additional Services That We Provide
In addition to microcement installation, we offer a range of complementary services to support your flooring projects:
Floor Levelling: Ensuring a flat and even surface for new flooring installations.
Coating Removal: Essential for starting your project, as you cannot microcement over a coating (such as epoxy).
Flooring Removal: Essential for starting your project if you cannot micro cement over your current flooring system (such as carpet).
Concrete Crack Repairs: Concrete crack repairs are crucial to maintain structural integrity and prevent further damage.
Concrete Cancer Repairs: If left untreated, concrete cancer can lead to severe weakening of the structure, potential collapse, and costly repairs in the long run.
Waterproofing Installation: Some areas may require the installation of a waterproofing membrane. Waterproofing is essential to prevent water damage and maintain the structural integrity of buildings.
Concrete Grinding & Floor Sanding: Essential for removing adhesive residues and preparing the surface for new flooring.
What Areas In NSW Do We Service?
Our Microcement specialists work throughout the greater Sydney region.
We service:
– Sydney
– St George
– Newcastle
– Inner West
– Wollongong
– Sydney CBD
– The Hills Shire
– Eastern Suburbs
– Sutherland Shire
– Northern Sydney
– Northern Beaches
– North West & Ryde
– Lower North Shore
– Upper North Shore
– South West Sydney
– Greater Western Sydney
We can take on any job at any time. No matter how big the job is, we’ll take it on!
Click Here To Learn More About The Areas In NSW That We Service
FREE QUOTE CALL OR TEXT 0424 408 330
We’ll Beat All Quotes By Up To 10%*, No Call Out Fee Conditions apply*
GET YOUR JOB BOOKED IN AND FINISHED TODAY !!
"*" indicates required fields
FREE PRICE BEAT GUARANTEE
QUOTE
We’ll Beat ALL Quotes By Up To 10%
Conditions apply. *Cannot be used in conjunction with any other offer.
Dust-Free Concrete Grinding Service
Dust-Free Concrete Grinding Service
Why Choose Microcement Services NSW For Your Concrete Grinding Needs?
Here at Microcement Services NSW there is a large range of reasons of why you should pick our concrete grinding team, such as:
Here at Microcement Services NSW there is a large range of reasons of why you should pick our team, such as:
Dust-Free Technology:
We invest in premium dust extraction systems that drastically reduce airborne particles, ensuring a cleaner, healthier worksite. This not only protects your property but also significantly reduces post-job clean up requirements.
Over 35 Years of Experience:
Our experienced team understands the unique complexities of different installation methods and installing it in a wide range of different areas. We know how to get the job done safely and efficiently.
Fully Licensed and Insured:
Microcement Services NSW operates with all the necessary industry licenses and insurance to ensure every project is protected, compliant, and professional.
Full-Service Floor Preparation:
We don’t just stop at installation. We prepare your concrete slab through grinding and adhesive removal as well as floor levelling, waterproofing, concrete crack repairs and concrete cancer repairs—making it perfectly ready for the installation of your new microcement.
Competitive Rates + Price Beat Guarantee:
We offer some of the most competitive prices in the industry and will beat any written quote from a competitor by up to 10%*, providing exceptional value without sacrificing quality.
Warranty Protection:
Professionally installed floor levelling products comes with a warranty, while DIY installations often fail within short periods of time and come with no warranty. Our services come with warranties (10, 20 or 30 years, depending on the product applied), giving you peace of mind.
Focus On Customer Satisfaction:
We aim to deliver results that exceed expectations. Our team is committed to providing professional service, open communication, and top-tier outcomes on every project.
Quality Materials:
We only use top-grade materials that meet Australian standards, ensuring longevity and performance.
Tailored Solutions:
We assess each project individually, providing customised floor levelling solutions to meet specific needs.
Our Concrete Grinding Process
We follow a highly refined multi-step process to ensure optimal results for every concrete grinding project:
Initial Assessment: We begin by inspecting your site to assess the current condition of your concrete surface, measure the work area, identify any coatings or contaminants, and determine the most effective grinding approach. This allows us to provide a clear, accurate, and competitive quote.
Site Preparation & Safety Setup: Prior to commencing grinding, our team thoroughly prepares the site. We set up dust control systems, isolate the work area, and implement all necessary safety protocols to protect your staff, clients, and property.
Precision Concrete Grinding: Using our advanced industrial diamond grinders, we gradually grind the concrete surface to the desired level. This may involve multiple passes using varying grit levels depending on the starting condition and final finish required.
Surface Finishing: For clients requiring polished concrete finishes, anti-slip treatments, or sealing, we offer tailored finishing services post-grinding to enhance durability, safety, and aesthetics.
Clean up and Disposal: Once grinding is complete, our team ensures the site is thoroughly cleaned, leaving your premises tidy and ready for immediate use or subsequent flooring installation.
Add-On Services For A Complete Flooring Solution
Microcement Services NSW offers a full suite of related services to prepare your floors for their next stage. These include:
– Floor Levelling
– Concrete Grinding
– Concrete Crack Repairs
– Concrete Cancer Repairs
– Waterproofing Installation
– Supply & Installation Of A New Flooring System
This makes us a one-stop solution for floor preparation services across Sydney.
Ready For A Dust-Free Concrete Grinding Quote?
We offer Australia-wide service, expert advice, and fast turnarounds — From small home residential jobs, to STRATA, Government and Complex Industrial projects, we do it all!
CALL US NOW 0424 408 330
Or fill out our Online Contact Form, and we’ll get back to you within 24 hours or less
✔ We beat competitor quotes by up to 10%
✔ Dust-Free guaranteed
✔ Over 10+ positive reviews
✔ Fully insured and compliant
✔ Australia-wide availability
Don’t risk your health, your floors, or your time — trust Australia’s concrete grinding experts.
DO YOU NEED HELP WITH A SERVICE?
Fill out the form and our team will contact you!
"*" indicates required fields
Price Beat Guarantee
10%*
We Will Beat All Of Our Competitors Quotes By Up To 10%*
FREE PRICE BEAT GUARANTEE
QUOTE
We’ll Beat ALL Quotes By Up To 10%
Conditions apply. *Cannot be used in conjunction with any other offer.
FREE QUOTE CALL OR TEXT
0424 408 330
We Will Beat All Quotes By Up To 10%*
No Call Out Fee Conditions apply*
GET YOUR JOB BOOKED IN AND FINISHED TODAY !!
"*" indicates required fields
"*" indicates required fields
"*" indicates required fields
OFFICE LINE
WORKING HOURS
